Градина.net

Semenata Shop presents to its customers quality Car parking grids for grass from plastic from Seven Seeds ltd. at a reasonable price.

This is an innovative product for building so-called green parking lots or reinforced grass. With their help, the parking lot is transformed from a boring industrial concrete structure into a part of the green area. Through the green plastic parking grids for grass from plastic from Seven Seeds ltd. you can achieve a higher percentage of landscaping in the construction of offices, office buildings, hotels, restaurants and more. highly urbanized projects.

Car parking grids for grass from plastic from Seven Seeds ltd. are made of high-density polyethylene, which makes them extremely strong and resistant to stress. One square meter of the elements can withstand a weight of up to 90 tons. UV stabilizer has been added to the polyethylene, which protects the grids from sunlight for a long time.

At the same time, the parking plastic grids in green are light and extremely easy to install. They have a special system for firm grip on each other and in a short time you can assemble with them and cover a large area.

This model of park fixtures has a lattice structure that completely lets water through rain or watering, thus allowing the grass grown in them to be irrigated without problems.

How to install high-density Car parking grids for grass from plastic from Seven Seeds ltd.?

When building parking lots and parking lots with plastic parking elements, you need to comply with several important rules for proper and long-term use.

Always apply the product on a solid base. To do this, dig the parking space if possible to a solid base. It is good to remove the humus soil layer and store it near the site so that it can be used to fill the gratings afterwards. We need an embankment of crushed stone with a thickness of 20 - 40 cm, which can be well compacted with a petrol rammer type "Pachi leg" or different types of construction rollers and machinery.

After preparing about 20 - 40 cm base, it is good to cover it with non-woven mulching fabric (agrol) or geotextile. This is done in order to protect the base and not to fill it with fine soil particles, which over time can cause clogging of the base, blocking the normal drainage and serious to the parking lot.

After covering the base, a layer of about 4 cm of construction sand is poured, which is also compacted with rollers and leveled and strictly leveled. Attention! Do not fill more than 5 cm of sand, because you risk the parking lot moving and sinking in places. On the prepared sand, you start the installation of the lattice bodies for parking lots. It is also important to level them.

After the installation of the Car parking grids from plastic from Seven Seeds ltd. they must be quickly filled with humus soil. Fill the bars to the top, and make a copious watering of the bodies with water to settle the soil. After the humus soil, you have poured settles, grassing follows.

Be sure to choose a grass mixture that is resistant to intense stress and necessarily one that tolerates low mowing. This is an important detail, because usually the height at which the grass grows in lattice parking lots is about 1 cm, and the leaf mass that protrudes above the elements is trampled by cars and does not survive. Suitable ryegrass for parking lots is grass mixture for golf Agrostis, grass mixture Sport Pro, grass mixture Extra fine, which you can find in our online store.

After watering the lattice parking lots, the soil in them has settled by about 1 - 2 cm. Spread the grass mixture evenly according to the norms specified by the manufacturer or increase the norm by up to 20%.

Then refill the bars to the top with humus soil. In this way the seeds will be covered with about 1 cm of soil, which is especially important for their proper development. It is good to spray with insecticide on ants so that they do not collect the seeds. Be sure to roll the finished parking lot.

Then water abundantly and be sure to wait for the grass to harden before putting the parking lot into operation. It is good to make about 2 mowings on the lawn before the parking lot is actively used.

Attention! Do not leave the Car parking grids for grass from plastic from Seven Seeds ltd. unfilled.

In addition to humus soil, you can fill the parking lot bodies with inert material - sand, fine gravel, white marble mosaic and more.

Application of Car parking plastic grids from Seven Seeds ltd..

This product is highly valued for the construction of green parking lots, various types of bicycle pavements, pedestrian areas in parks and public green areas and more. They are especially effective in strengthening slopes and steep sections against landslides.

Not infrequently with the Car parking plastic grids in green color are built horse bases, golf courses, kindergartens, playgrounds, restaurants, guest houses on a European project, hotels, hotel complexes, gas stations, soil bases, sanatoriums, private villas, residences of diplomats and ministers , churches, monasteries, etc.

Technical characteristics of Car parking grids for grass from plastic from Seven Seeds ltd.:

Sizes of 1 pc. plastic parking element - 492 x 492 x 39 mm

Material - Polyethhigh density (PP and PE granules) and added UV stabilization

Color - Green and black (on request at min 100 sq.m)

A number of grids for parking from plastic in 1 sq. M - 4.4 pcs.

Weight per 1 sq.m - 3.08 kg

One pallet can load 50 square meters (220 parking lots).

Guaranteed origin - EU

Note! The indicated prices include VAT for 1 piece. parking grille. 

Thank you seeds catalog Semenata org for everything you have done for us.